Axle
It is partially keyed - 14" on one side, 4" on the other. So, more then enough space for a wheel, drive sprocket and brake sprocket. It is made of 303 Stainless Steel - I'm darned happy because it is shiny, and it's going to stay that way. I would hate having a rusty steel axle and be fighting to remove all the sprockets from it in the future. The disadvantage is that the tensile strength is much lower, but still around 70,000lbs - It seems like a lot to me, but I'm sure the forces in this kind of system are intense.
For scale, the 1" bar in front is 12" long (30cm). The drive motor is properly aligned with the axle sprocket but perhaps too close together, I really need a frame to mock that up properly.
Frame
Speaking of frame, that's my task for this week, to go shopping at Metal Supermarkets, and to get a red flag or something to hang off the metal I'm sure will be sticking from the rear of my car. Thinking 1 1/2 square rather than 1 1/4 most (gas karts) use because of the extra weight I'll be lugging around in batteries.
Batteries
Still waiting for my contact at a certain battery company to get back to me. I have a contact who put me in touch with the sales manager, so I'm hoping to swing a great deal from them. It would cut a lot off the purchase price.
Interestingly I was also told to consider using NiMH - either industrial packs or sub-C cells - and making my own battery pack. Well that's the advantage of talking to people in the know, I would never have considered such a plan.
Apparently on Monster Garage they converted an old Bel Air to run on cordless drill batteries! Have to check that out some time.
Brakes
I've been reading a lot on www.diygokarts.com and a lot of people have been helpful there. A certain member who lives relatively close to me not only offered me advice and pictures of his experience, but also offered to sell me a set of working hydraulic brakes for a steal, only $60! Remember the bike shop earlier quoted $150 for the same exact deal - one set of used brake parts. Different models I am sure, but in both cases, just whatever was lying around.
I'm ecstatic! It might be a pain getting over to see him but totally worth it. I'm sure I will get a lot of sage advice too. Anyone else considering a similar project to this *really* needs to spend time on forums, there are some awesome people on the internet (i.e. in real life, that you can communicate with on the internet hehe)
Trailer
On a completely different note, I have been considering how to move this kart around when it's finished. Most people are settled and build these in their back yards... seeing as I am in an apartment this is a problem.
I have recently realized that my go kart has trailer tires, and the front (will have) actual trailer stub axles. So - get the kart licensed as a trailer, and tow it backwards! I'm thinking to build a pin into the steering mechanism to lock the steering straight for towing, and leaving a place to attach a long trailer hitch arm to the rear of the kart.
The Ontario website does not indicate much in the way of requirements for trailers so I think it should be relatively easy to get it plated.
Until next time...
No comments:
Post a Comment